Table of Contents
Warco BDS-460 Belt and Disk Sander
[Picture here, use the media manager]
Overview
Machine currently in need of repair - the plastic guard on top of the belt has been snapped.
The BDS-460 is a miniature fixed sanding machine for use with wood only. It features a small disk sander which can be used for cleaning and smoothing edges of material, and a belt which can be used for smoothing surfaces. The disk has a plate and an angle guide so that material can be aligned. The belt can be set in a horizontal or upright position.
Safety & Induction
Risk Score Amber
Risk Assessment: Link
Do I need an induction to use this machine? Yes
Can I use this machine while lone working? Yes
| PPE | Required / Suggested / Banned |
|---|---|
| Eye protection | Required |
| Gloves | Suggested |
You must wear eye protection when using this machine.
You must use direct extraction when using this machine.
Never feed material in to the right hand side of the disk, it will throw it upwards. Feed material in so the disk is pulling it down towards the plate.
Induction Information
Do I need an induction to use this machine?: Yes
- You can get an induction for this machine by submitting a request to contact@newportmakerspace.org, or by completing this google form
- An induction for this machine is expected to take up to 1 hour
- The induction will cover setup and safe usage of the machine in both modes
Maintenance History
Date next maintenance is due: 11/11/25
| Date | Member ID | Notes |
|---|---|---|
| 11/11/25 | 00001 | Plastic top guard to belt found to be damaged, machine in need of repair |