Creudy Casnewydd / Newport Makerspace Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Charnwood W791 Dust / Chip Extractor =====

{{ equipment:images:w791dustextraction.jpg?400 |[Picture here, use the media manager]}}

==== Overview ====

This machine is a dust and chip extractor intended to be used with other wood working machines. When operating, dust and chips will be diverted to a bag attached to the machine, this needs emptying over time. 

[[https://www.poolewood.co.uk/product/charnwood-w791-dust-extractor-240v-415v-w791-1-3/?v=79cba1185463|Link to suppliers catalogue page]]
A paper manual is kept in the makerspace for this machine

==== Safety & Induction ====

:!: Risk Score **Green**

:!: Risk Assessment: {{ :equipment:risk_assessments:nmcc_-_risk_assessment_-_dust_extractor_-_20.05.2025.docx | Link}}

:!: Do I need an induction to use this machine? **No**

:!: Can I use this machine while lone working? **Yes**

^ PPE      ^ Required / Suggested / Banned      ^
|Eye protection|N/A|
|Hearing protection|Required|
|Gloves|N/A|

=== Induction Information ===

  * Inductions are not required for this tool. However, use of this machine will be shown in inductions for other machines where its use is necessary. 

==== Maintenance History ====

Date next maintenance is due: **01/04/2026**

^ Date      ^ Member ID      ^ Notes          ^
| 01/10/2025 | John O | PAT test completed |
| 03/20/2022 | Adrian         | The fan was raised to prevent scraping, and washers were added above the shaft to avoid its being pushed down again. |
| 01/07/2025 | Committee | Emptied bag and blew out filter |
|             |                |                |