Differences

This shows you the differences between two versions of the page.

--- equipment:metalworking_room:gh600lathe [2025/10/05 15:57] – ↷ Page moved from equipment:gh600lathe to equipment:metalworking_room:gh600lathe jamesball
+++ equipment:metalworking_room:gh600lathe [2026/05/11 23:27] (current) – ↷ Links adapted because of a move operation 27.125.242.228
@@ Line 1: / Line 1: @@
 ===== Warco GH600 Metal Lathe =====
-{{ :equipment:gh600lathe.jpg?400 |[GH600 Lathe]}}
+{{ equipment:images:gh600lathe.jpg?400 |[GH600 Lathe]}}
 ==== Overview ====
@@ Line 54: / Line 54: @@
 ==== Tooling ====
-{{:equipment:img_20250923_200335_hdr.jpg?400|}}
+{{equipment:images:img_20250923_200335_hdr.jpg?400|}}
 ^ Holder ^ Description ^
@@ Line 65: / Line 65: @@
 | SCLCR1212H06 | right-hand CCMT inserts (6mm, 80° diamond, 7° clearance) |
-{{:equipment:img_20250923_200516_hdr.jpg?400|}}
+{{equipment:images:img_20250923_200516_hdr.jpg?400|}}
   * 2 Sets of boring bars, all using CCMT inserts (6mm, 80° diamond, 7° clearance) in 8, 10, and, 12 mm shank diameter.
-{{:equipment:img_20250923_201457_hdr.jpg?400|}}
+{{equipment:images:img_20250923_201457_hdr.jpg?400|}}
   * 2 dead centres for turning between centers (large one for headstock small one for tailstock).
@@ Line 75: / Line 75: @@
   * Live centre
-{{:equipment:img_20250923_201548_hdr.jpg?400|}}
+{{equipment:images:img_20250923_201548_hdr.jpg?400|}}
   * 2 wheel knurling tool with straight and diamond pattern wheels.
   * single wheel straight knurl tool.
-{{:equipment:img_20250923_200135_hdr.jpg?400|}}
+{{equipment:images:img_20250923_200135_hdr.jpg?400|}}
   * Set of 18 R32 collets in 1mm size increments to fit from 2mm to 20mm.
 ==== Maintenance History ====
-Date next maintenance is due: **10/01/2022**
+Date next maintenance is due: **01/04/2026**
 ^ Date      ^ Member ID      ^ Notes          ^
-| 01/12/21 | Aidan | Noticed that the machine is continuing to bleed oil which is dripping from corner of control panel. Contacted Warco and was informed this is 'normal', they recommend keeping an eye on the oil level and topping up if below 50% |
+| 01/10/2025 | John O | PAT test completed |
-| 01/11/21  | Aidan, Russell | Tested basic turning operations on the lathe, working as expected. Noted that oil is bleeding from corner of control panel |
+| 01/12/2021 | Aidan | Noticed that the machine is continuing to bleed oil which is dripping from corner of control panel. Contacted Warco and was informed this is 'normal', they recommend keeping an eye on the oil level and topping up if below 50% |
+| 01/11/2021  | Aidan, Russell | Tested basic turning operations on the lathe, working as expected. Noted that oil is bleeding from corner of control panel |
 |   |   |   |